Nokia 6233

Nokia 6233 example: 

1 Pres Menu button 2 Choose Settings 3 Choose Configuration
     


4 Scroll down to
Personal config. Settings
5 Choose Options 6 Choose Add New and Select
     


7 Choose Web and press Select 8 Select Account name and press Select 9 Type in "MCP internet"  and press OK (insignificant: small/capital letters)
     


10 Choose Homepage and press Select 11 Type "mobile.google.com" as your homepage and press OK 12 Choose Use preferred access pt. and press Select
     


13 Select No 14 Scroll down to Accsess point settings and Select 15 Proxy must be Disabled, if not, Select and change it
     


16 Scroll down to Bearer Settings.
Press Select
17 Select Packet data access point and type in "internet". Then press OK
                            


18 Select Authenttication type and Select 19 Select Normal. Press Back (lower right corner) 20 Press Back 3 mote times to go back to the Configuration settings menu.
    If you press the Exit key  , preform steps 1,2 and 3 again to enter the Configuration settings menu.


21 Select Default config. Settings 22 Choose Personal configuration and press Select 23 Press Default and then the Exit key,
     


24 Press Menu and then the Web or Internet 25 Select Settings 26 Select Configiration settings
     


27 Select Configuration 28 Select Personal configuration 29 Choose Account, Select
     


30 Find "MCP internet" and press Select 31 Verify the Configuration and Account as below 32 Then you are done!
    Press Back button or the Exit button   to exit the menu




Nokia short guide:
If you are more familiar with the Nokia menu, you can follow the short guide below:

Example for Nokia 6233
1) Menu > Settings > Configuration > Personal config. settings  >  Options  > Add new > Web
2) Account name: MCP internet
3) Homepage: mobile.google.com
4) Use preferred access pt.: NO
5) Access point settings  >  Proxy:  Disabled
    Data bearer: Packet data
6) Bearer settings -> Packet data access point: internet
    Check that Network type: IPv4
    Authenticate type: Normal
7) Activate settings:  Menu -> Web -> Settings -> Configuration settings -> Configuration
8) Configuration: Personal configuration 
9) Account: MCP internet
10) Exit